Hand Made Flowers, Frame and Stitching

 I recently treated myself to a couple of the discontinued Elizabeth Craft/Susan Tierney Cockburn die sets, and I wanted to make something a little different with them. One of the sets is actually an oval nesting set, but with some bigger dies than I have. I got the original sets of Spellbinders Nestibilities, but the problem with them was always that the format was too small. I think their US bias got stuck on that odd 'A2' size card they use which isn't standard anywhere else. So, even for A6 cards, their dies just didn't look quite right. But enough of that.

The first part of the project was to cut out the frame elements. For them, I used an Elizabeth Craft die I've had for some time. It's smaller than I'd like, so I stretched the pieces to approximately 9 and 11 inches long giving me a frame with a 7 by 9 inch aperture. I always get it wrong when I do this - one piece of card ends up in the bin during the process, and this time was no exception.

Because the black card I used isn't the best quality, I reinforced the underside of the front panels with strips of the same black card before pricking out the stitching pattern. The pattern I used came from a book I've had for many years called The Art of Decorative Paper Pricking by Janet Wilson. It's not really intended for stitching, and it's not even one of the patterns in the book - it's actually used as page decoration. But, with a little resizing in Photoshop Elements, I got it to a suitable size, and printed out a strip for each frame edge. I used Sulky Blendables to stitch the pattern.

Another recent (bargain) purchase, is the embossing folder I used here. I don't use A4 embossing folders often, but when you want to emboss a bigger area, smaller ones won't do the job. I got his folder (from Crafts Too) at Crafterama at Ally Pally last weekend. I embossed a bit of Coredinations Whitewash card I've had for ages. (I don't even know if it's still on the market.) I sanded the surface after embossing. I had to add another layer of card behind the Coredinations as it was a bit floppy - especially after embossing.

The next stage was to cut some corners for the frame (Spellbinders die - it's one of their debossing range that never really took off. I definitely found them very hard to cut with - fortunately, there's not much actual cutting needed for this corner die. I then cut another piece of the satin gold card and used the Elizabeth Craft oval die to cut the aperture. I then embossed the gold card using the same folder, and attached it with foam pads doubled up for extra height.

Then, I got to the really fun part. I cut pieces for three dahlias in white card and coloured using Promarkers. I added some striping (white on the shocking pink flower and magenta on the yellow) using fine Posca pens. The peach coloured flower has some added magenta promarker added to the petal tips for a bit of added colour.

That's about that!

A little word about Ally Pally last weekend. It was the first time I've been back since Covid lockdowns, and, of course, since it changed ownership. I think it's a real shame many of the exhibitors who used to go to Ally Pally haven't continued. Craft shops in London are pretty much limited to Hobbycraft - especially since Blade Rubber Stamps closed down. It's strange that such a large conurbation can't support a bigger show than this. I know it's probably more expensive because of generally higher London prices, but it's a real shame. Having said that, I did buy a few bits, and it was lovely to see a stall with just Aall and Create which was definitely something new for me. Unfortunately, my daughter wasn't well enough to come with me :(

Easter and Anniversary Cards

 The first few are Easter cards from patterns by Stitching Cards.

This is a new pattern from Stitching Cards. I thought it was cute!

And an older, although new-to-me pattern.

And a couple of cards from a company called Form a Line. They've got quite a few free patterns, and in fact, I think the designer is the same as for Stitching cards. In both cases, I've used the free Stitching Cards font to add, or in one case, change the greeting.

This one was just the floral wreath.

And this one originally had a Happy Birthday greeting which I replaced. All the stitched cards used machine embroidery thread.

Stamping this time, and not a clear stamp in sight! The central image is a stamp by Crafty Individuals. Once it was stamped, I masked it, and then added further images using stamps from Stamperia (music and the right hand lace strip) and U Mount (butterflies) and the crackle (Crafty Individuals again). All images were stamped with Verrsafine Clair in Acorn. The background shading was added with Distress Ink. I added further colour to various elements using pastel pencils. The background paper came from a CDRom I've had for a very long time called Crafty Image Emporium. I tweaked the colour in Photoshop elements. 

And finally, an anniversary card for my OH. The background was made ages ago and not used. There's Distress Ink, a stencil and a stamp involved there. The diamond shapes were cut using Spellbinders Nestibilites. I added a gold border using an acrylic paint pen. The digits were cut using a die set from, I think, The Works. The sentiment was stamped using a pre-inked stamp I've had for a very, very long time. I bought it before I was comfortable stamping! I added some colour to the leafy bit using a Posca pen.

See what happens when you're planning to be out all day, and then the weather means you have to stay in and craft instead!

A Special Birthday Card

 I had to make a card for a special birthday.  I'd seen someone using the Lavinia Lillium stamp as a partial background recently - I think it was on the Lavinia group on Facebook, but I wasn't planning on using it when I saw it, so I didn't not the originator. Anyway, that's how I started.

I made the card base approximately 8in square, and I've created a vine effect with the Sizzix/Susan Tierney Cockburn Beeblossom die, along with a couple of other branch dies from other Susan Tierney Cockburn set from other manufacturers. I coloured the flowers with Promarkers, adding some detail with Pan Pastel. The leaves were made using olive green card. I stamped the Lillium with Versafine Clair ink, and coloured the blooms with Promarker, then outlined them with an fine Posca pen. You can't see it in the photo, but I finished the flowers by adding a layer of clear glitter marker (Crafter's Companion). I created a suitable sentiment in Photoshop Elements and cut it and a mat with a Spellbinders die set. The stamped area was shaded with Distress Ink in Tattered Rose and Spun Sugar. I added a darker shade around the whole edge using Picked Raspberry (which I originally misread as Pickled Raspberry, and that's how I always think of it!) I've digitally removed the sentiment for the photo.

I made a couple of insert pages using similar techniques.

Beeblossom is quite a dimensional flower, so there's no way this card was going into an envelope. Therefore, the next stage was to make a box. I used 12 by 12 white card to make a basic lid and tray box which I decorated to match the card. Again, I've digitally removed the recipient's name.

I added an oval label area with a mask, and a little background texture with Tattered Rose ink and a Lavinia stencil.

Needle Cases

 At my craft group, someone showed a needle case they'd been given and wondered if we could do something similar. I had a think, and decided to go with an Eileen Hull Bigz die.

My first attempt was ok, but there were a couple of things I decided to change.

I also used some very old Sizzix dies for the scissors, needle and thread which I cut out of rose gold Sizzix Surfacez. (What's the singular of that?) Anyway, my base here was 300gsm card, and I covered it with a scrap of cloth I've had knocking around for ages. I cut some felt remnants I had through the die too, but using folded felt on the die up to the first fold line. The result had a few issues. First, the cover is quite floppy. Not a major issue, but not what I wanted. The other thing is that, using the die to cut the felt resulted in pages that were a bit too big. They fit, but polyester felt is quite stretchy, and the result just didn't look neat enough for me. I used double-sided sticky sheets to adhere the fabric, and finished it off with some lace and elastic cord to make a closure.

My second attempt I tried something a bit different, and I'd also bought some new felt so I could choose colours to fit!

This time, I used some grey board - in fact it was the back of an old notepad. That gave a much firmer basis. For decoration, this time, I used some ribbon, and then a Tonic die from its Sew Pretty range which I decorated with metallic gold thread.

This time, I cut the felt by hand. This gave a wonkier result, but the needle case itself looks much better.

I took a bit of the offcut from the cover (grey board covered in fabric both sides) and cut it to make a loop as show. I adhered it with tacky glue. I think I need to come up with a better option (elastic maybe?) as the scissors fall out if the case is upside-down. I'll continue to give it some thought!